Dialflow O2 Regulator Range E 0.01 to 1 l/min - UK Bullnose/Barb

Product Code: 818-0030
Manufacturer: BPR


( £197.35 Ex. VAT )

    ABOUT Dialflow O2 Regulator Range E 0.01 to 1 l/min - UK Bullnose/Barb

    Our Dialflow Regulators provide all the benefits of Microdial and Dialflow Meters without the need for a regulated gas supply. Benefiting from a built in state-of-the-art piston style pressure regulator, Dialflow Regulators deliver accurate flow rates from full to near empty gas cylinders.

    • Accurate, repeatable standard and micro flow control
    • A range of international cylinder connections to suit most gas cylinder valves
    • Combination units with pressure and flow ports
    • Halogen-free


    Device Specifications:

    Inlet ConnectionBullnose BS 341 No 3
    Outlet ConnectionBarb to EN 13544-2 (6 mm nominal tube)
    Auxilliary PortNone
    Flow Range0.01 to 1 l/min
    Inlet Pressure0.9 to 20 MPa (9 to 200 bar)
    Standard Discharge (Q1)N/A
    Maximum flowN/A
    Inlet filtration40 µm
    Orifice Plate Filtration5 µm
    Accuracy at nominal pressure+/- 10 % of setting at 1 l/min and above. +/- 20 % of setting below 1 l/min
    Over pressure valve set point550 kPa
    Service Interval4 years
    Environmental Limits for Transport and StorageTemperature: -20 °C to 60 °C (-4 °F to 140 °F) Humidity: 0 - 100 % RH
    Environmental Limits for UseTemperature: -20 °C to 60 °C (-4 °F to 140 °F) Humidity: 0 - 100 % RH
    Applied StandardsN/A
    RegulatoryEC: MDD Class IIa Medical Device

    For other flow ratings please see;



    This product hasn't been reviewed yet. Write a review


    © Copyright Bar O2 Limited T/A the OxygenStore 2001-2019.  All rights reserved.  Company Registered in UK No 04192727.  VAT Registration No 770 4717 24. EORI GB770471724000 Dun and Bradstreet D-U-N-s No 232439047